Specifications

5-10
Cisco ONS 15216 EDFA2/EDFA2-A Operations Guide, R2.4
July 2004
Chapter 5 SNMP MIB Configuration
5.3 Setting Up for CTM Access
};
Table 5-7 displays the decimal values for the following SNMP operations.
For example, 255 is the sum of all decimal values and specifies access to all SNMP operations. This sum
is the default private community. 247 is the sum for all SNMP operations with the exception of the Set
operation. This sum is the default public community.
5.3 Setting Up for CTM Access
Use the following procedure to configure a new ONS 15216 EDFA2 for Cisco Transport Manager (CTM)
access:
Step 1 Log into the serial port. Use 19,000 bps, 8 bits, no parity, 1 stop, and no flow control over a
male-to-female straight 9-pin cable.
Amp01:ONS15216 EDFA2> ACT-USER::CISCO15:123::;
Step 2 Set the default user password to admin15##:
Amp01:ONS15216 EDFA2> ED-PID::CISCO15:124::,admin15##;
Step 3 Enter the IP address and node name configuration information:
Amp01:ONS15216 EDFA2> ED-NE-GEN:::125:::NAME= ,IPADDR= ,IPMASK= ,DEFRTR= ;
Step 4 Set the date and time:
Amp01:ONS15216 EDFA2> ED-DAT:::126::2003-06-18,08-49-00;
Step 5 Activate the new IP address by rebooting:
Amp01:ONS15216 EDFA2> INIT-SYS::ALL:127::1;
Step 6 Telnet to the ASH shell by typing the following:
telnet <ONS 15216 EDFA2 IP address> 8023
Step 7 Login using the user name CISCO15 and the password admin15##.
Table 5-7 SNMP Operation Decimal Values
SNMP Operation Decimal Values
Get 1
GetNext 2
Response (enable for all community strings) 4
Set 8
SNMPv1-Trap 16
GetBulk 32
Inform (enable for all community strings) 64
SNMPv2-Trap (enable for all community strings) 128