Specifications

4-2
Cisco ONS 15216 EDFA2/EDFA2-A Operations Guide, R2.4
July 2004
Chapter 4 Provisioning with ASH and SNMP
4.1 Log In via RS-232 (EIA/TIA-232) Port Using HyperTerminal
By default the ONS 15216 EDFA2 is in TL1 shell, so this step may be required to proceed in ASH shell.
When in TL1 shell, the screen opens to a simple prompt (
>). To change to ASH shell, log in using the
procedure in the“8.1 Log In via RS-232 (EIA/TIA-232) Port Using HyperTerminal” section on
page 8-1, and then enter the following command at the sid/tid name prompt:
sidtidname :ONS15216 EDFA2> ED-NE-GEN:::123:::CLI=ASH;
Then enter the following command at the hostname prompt:
sidtidname :ONS15216 EDFA2> INIT-SYS::ALL:1234::1;
The ONS 15216 EDFA2 should log you off and then bring up the ASH shell login window.
Step 4 Check that the ONS 15216 EDFA2 login window appears as shown in Example 4-1.
Example 4-1 ASH Shell Login Window
-- LOGIN ---------------------------------------------------- --------
Username: { }
Password: { }
[Login]
Step 5 Enter both a user name and password.
The default user name and password is CISCO15 with no password (press Enter).
Note For security reasons, it is recommended that you change the password from its default value. See
the “4.9 Set Password” section on page 4-10 or the “8.9 Set Password” section on page 8-11.
Step 6 Press Enter when [Login] becomes highlighted. Example 4-2 displays the login response.
Example 4-2 ASH Shell Login Response
Welcome to ONS15216 EDFA2 Console (v2.4.0)
************************** Warning *********************************
This system is restricted to authorized users for business purposes.
Unauthorized access is a violation of the law. This service may be
monitored for administrative and security reasons.
By proceeding you consent to this monitoring.
********************************************************************
ash:
hostname :ONS15216 EDFA2>
An EIA/TIA-232 link to the ONS 15216 EDFA2 is established. The user can now provision the ONS
15216 EDFA2.