Specifications

9-70
Cisco ONS 15216 EDFA2/EDFA2-A Operations Guide, R2.4
July 2004
Chapter 9 TL1 Commands
9.6.44 SET-ATTR-EQPT
Table 9-50 SET-ATTR-EQPT Syntax Description
Parameter Syntax Description
aid Possible values are:
EQPT General parameters of the ONS 15216 EDFA2.
PWR-A Affecting Power Bus A.
PWR-B Affecting Power Bus B.
ALL Any or all of the preceding (command input only).
ntfncde Notification code (maps to cerent15216EdfaAlarmPriority).
Possible values are:
CR Critical alarm.
MJ Major alarm.
MN Minor alarm.
NA Not alarmed.
NR Not reported.
NULL Deafults to NA.
condtype Condition type identifies the type of alarm (maps to
cerent15216EdfaLogEventID). Possible condtype and
corresponding conddescr (in quotes) are:
CTMP “Case Temperature Out of Range” alarm
(cerent15216EdfaAlarmCtmp).
DBBACKUP “Database Backup In Progress”
(cerent15216EdfaOpDbBackup).
DBRESTORE “Database Restore In Progress”
(cerent15216EdfaOpDbRestore).
LCRNT1 “Excessive Pump1 Current” alarm
(cerent15216EdfaAlarmLcrnt1).
LCRNT2 “Excessive Pump2 Current” alarm
(cerent15216EdfaAlarmLcrnt2).
LTMP1 “Excessive Pump1 Temperature” alarm
(cerent15216EdfaAlarmLtmp1).
LTMP2 “Excessive Pump2 Temperature” alarm
(cerent15216EdfaAlarmLtmp2).
PWRBUSA “Power Bus A (voltage) Alarm”
(cerent15216EdfaAlarmPowerBusA).
PWRBUSB “Power Bus B (voltage) Alarm”
(cerent15216EdfaAlarmPowerBusB).
SFTWDOWN “TFTP Software Load” (cerent15216EdfaOpLoad).
NULL Defaults to ALL.