Specifications

9-47
Cisco ONS 15216 EDFA2/EDFA2-A Operations Guide, R2.4
July 2004
Chapter 9 TL1 Commands
9.6.27 RTRV-ATTR-DWDM
"<aid>,<ccm>:<ntfcncde>,<condtype>,,,"
;
Example 9-31 RTRV-ATTR-DWDM Command and Response
Amp01:ONS15216 EDFA2> RTRV-ATTR-DWDM:Amp01:1:229::MJ,,,,;
Amp01 2002-06-20 14:30:00
M 229 COMPLD
"1,DWDM:MJ,LOS,,,"
"1,DWDM:MJ,GAIN,,"
"1,DWDM:MJ,LPOUT,,"
;
Table 9-33 RTRV-ATTR-DWDM Syntax Description
Parameter Syntax Description
aid 1 and ALL have same input effecct.
1 Directly affecting the optical signal.
ALL Any or all of the preceding (command input only).
NULL Defaults to ALL.
ntfncde Notification code (maps to cerent15216EdfaAlarmPriority).
Possible values are:
CR Critical alarm.
MJ Major alarm.
MN Minor alarm.
NA Not alarmed.
NR Not reported.
ALL Any or all of the preceding (command input only).
NULL Defaults to ALL.
condtype Condition type identifies the type of alarm (maps to
cerent15216EdfaLogEventID). Possible condtype and
corresponding conddescr (in quotes) are:
LOS “Loss of Signal” (input power) alarm
(cerent15216EdfaAlarmLpin).
GAIN “Gain Out of Range” alarm (cerent15216EdfaAlarmGain).
LPOUT “Loss of Output Power” alarm (cerent15216EdfaAlarmLpout).
ALL Any or all of the above.
NULL Defaults to ALL.