Specifications

9-23

Cisco ONS 15216 EDFA2/EDFA2-A Operations Guide, R2.4

July 2004

Chapter 9 TL1 Commands

9.6.13 ED-PID

Command Types ED-PID

Edits password.

Syntax Description

ED-PID:[<tid>]:<uid>:<ctag>::<oldpid>,<newpid>;

Example 9-15 ED-PID Command

Amp01:ONS15216 EDFA2>

ED-PID:Amp01:JOE:123::OLDPW,NEWPW;

9.6.14 ED-USER-SECU

Command Types ED-USER-SECU

Edits the user identifier, password and access level of an existing user. Per TR-835, only those data

parameters that are to be edited are entered while those that are unaffected are omitted. If any

position-defined parameter is omitted, a comma is to be used as the delimiter.

Syntax Description

ED-USER-SECU:[<tid>]:<uid>:<ctag>::[<newuid>],[<pid>],,[<al>][:];

cli Default type of command line interface for all EIA/TIA-232

and default telnet port user sessions with the ONS 15216

EDFA2. Possible values are:

TL1 TL1shell interface (manufacturer default).

ASH ASH shell interface – ONS 15216 EDFA2’s native interface.

Table 9-18 ED-NE-GEN Syntax Description (continued)

Parameter Syntax Description

Table 9-19 ED-PID Syntax Description

Parameter Syntax Description

uid string The user’s identifier (user name).

oldpid string The user’s old password.

newpid string The user’s new private identifier (password). Must be a string

of up to 10 characters, where at least 2 are non-alphabetic

characters and at least 1 is a special character. Special characters

are +, #, and %.