Specifications

9-18
Cisco ONS 15216 EDFA2/EDFA2-A Operations Guide, R2.4
July 2004
Chapter 9 TL1 Commands
9.6.7 DLT-RFILE
9.6.7 DLT-RFILE
Command Types DLT-RFILE
Deletes a file from the flash file system (FFS) of the ONS 15216 EDFA2.
Syntax Description
DLT-RFILE:[<tid>]::<ctag>::FILE=<localfilename>;
Example 9-9 DLT-RFILE Command
Amp01:ONS15216 EDFA2>
DLT-RFILE:Amp01::1234::FILE=snmp.cfg;
9.6.8 DLT-USER-SECU
Command Types DLT-USER-SECU
Deletes (removes) an existing user from the system.
Syntax Description
DLT-USER-SECU:[<tid>]:<uid>:<ctag>;
tofile CFG ONS 15216 EDFA2 system configuration in memory.
The system must be rebooted using INI-SYS for changes to the
system configuration to take effect.
any other string The name string of the destination file. A null value is valid
only when fromfile is LOG or null and fromdev is MEM or null.
When null is valid, the system log file (LOG) is saved as
aolog.txt.
File names are case sensitive.
If copying from RAM (MEM) and the destination file name
already exists, the destination file is overwritten. If copying
from FFS and the destination file name already exists, the
execution fails.
Table 9-12 CPY-MEM Syntax Description (continued)
Parameter Syntax Description
Table 9-13 DLT-RFILE Syntax Description
Parameter Syntax Description
localfilename string Name of the file on the flash file system of the ONS 15216
EDFA2 that is to be deleted. File names are case sensitive.