Specifications

9-13
Cisco ONS 15216 EDFA2/EDFA2-A Operations Guide, R2.4
July 2004
Chapter 9 TL1 Commands
9.6.2 ALW-MSG-ALL
ALSCHGD “ALS (automatic laser shutdown) Changed”
(cerent15216EdfaALSModeEnable).
CONFIGSAVED “Config Saved”.
CTRLMODE1 “Pump1 Control Mode Changed”
(cerent15216EdfaControlMode for
cerent15216EdfaPumpCfgPumpNumber=1).
CTRLMODE2 “Pump2 Control Mode Changed”
(cerent15216EdfaControlMode for
cerent15216EdfaPumpCfgPumpNumber=2).
CUTOVERRESET (Software) “Reset after Cutover”
(cerent15216EdfaOpCutover).
DBBKRTCRCERR “Database Backup/Restore CRC Error”
(cerent15216EdfaActionOpResult).
DBBKRTERR “Database Backup/Restore Error”
(cerent15216EdfaActionOpResult).
DBBKRTFILEERR “Database Backup/Restore File Error”
(cerent15216EdfaActionOpResult).
DBBKRTOBJERR “Database Backup/Restore Object Error”
(cerent15216EdfaActionOpResult).
DBBKRTSNMPERR “Database Backup/Restore SNMP Error”
(cerent15216EdfaActionOpResult).
DBBKRTTOERR “Database Backup/Restore Timeout Error”
(cerent15216EdfaActionOpResult).
GAINCHGD “Overall Gain Changed”
(cerent15216EdfaConstGainOverallGain).
LOSHYSTCHGD “LOS (loss of signal) Hysteresis Changed”
(cerent15216EdfaLOSHysteresis).
LOSTHCHGD “LOS (loss of signal) Threshold Changed”
(cerent15216EdfaLOSThreshold).
LPOUTCHGD “Loss of Output Power Setpoint Changed”
(cerent15216EdfaLpoutSetpoint).
LPOUTDEVCHGD “Lpout (loss of output power) Deviation Changed”
(cerent15216EdfaLpoutDeviation).
LPOUTHYSTCHGD “Lpout (loss of output power) Hysteresis Changed”
(cerent15216EdfaLpoutHysteresis).
MAXCTMPCHGD “Max Case Temperature Changed”
(cerent15216EdfaCtmpMax).
MAXCTMPHYSTCHGD “Max Ctmp (case temperature) Hysteresis Changed”
(cerent15216EdfaCtmpMaxHysteresis).
MINCTMPCHGD “Min Case Temperature Changed”
(cerent15216EdfaCtmpMin).
Table 9-9 ALW-MSG-ALL Syntax Description (continued)
Parameter Syntax Description