Specifications

9-11
Cisco ONS 15216 EDFA2/EDFA2-A Operations Guide, R2.4
July 2004
Chapter 9 TL1 Commands
9.6.2 ALW-MSG-ALL
Syntax Description ACT-USER:[<tid>]:<uid>:<ctag>::<pid>;
Example 9-1 ACT-USER Command
Amp01:ONS15216 EDFA2> ACT-USER:Amp01:JOE:123::***;
9.6.2 ALW-MSG-ALL
Command Types ALW-MSG-ALL
Permits or resumes the dispatch of automatic messages from the ONS 15216 EDFA2 that were inhibited
by an INH-MSG-ALL call. All alarms in existence at the time that this command restores them are
transmitted via REPT ALM and REPT EVT messages. If a previously inhibited user executes
ALW-MSG-ALL, the user will not receive notifications of alarms raised before execution of
ALW-MSG-ALL.
Syntax Description
ALW-MSG-ALL:[<tid>]::<ctag>::[<ntfcncde>],[<condtype>][,];
Example 9-2 ALW-MSG-ALL Command
Amp01:ONS15216 EDFA2> ALW-MSG-ALL:Amp01::123::MJ,LOS;
Table 9-8 ACT-USER Syntax Description
Parameter Syntax Description
uid string The user’s identifier (user name). Can be any combination of up
to 10 alphanumeric characters.
pid string The user’s private identifier (password). The password must be
a string of up to 10 characters, where at least 2 are
non-alphabetic characters and at least 1 is a special character.
Special characters are +, #, and %.
Table 9-9 ALW-MSG-ALL Syntax Description
Parameter Syntax Description
ntfncde Notification code of the alarm or event that is to be
allowed (maps to cerent15216EdfaAlarmPriority for
active alarms). A null maps to none of the codes, i.e.,
with a null, all existing ntfncde inhibitions are kept
unchanged. Possible values are:
CR Critical alarm.
MJ Major alarm.
MN Minor alarm.
NA Not alarmed.