Specifications

9-9
Cisco ONS 15216 EDFA2/EDFA2-A Operations Guide, R2.4
July 2004
Chapter 9 TL1 Commands
9.5 Summary of Security Permissions for TL1 Commands
RTRV-ATTR-DWDM Retrieves alarm severity of optical
alarms.
See the
“9.6.27 RTRV-ATTR-DWDM”
section on page 9-46.
Yes Yes Ye s
RTRV-ATTR-EQPT Retrieves alarm severity of general
alarms.
See the “9.6.28 RTRV-ATTR-EQPT”
section on page 9-48.
Yes Yes Ye s
RTRV-COND-ALL Retrieves condition (state) of all
current alarms.
See the “9.6.29 RTRV-COND-ALL”
section on page 9-49.
Yes Yes Ye s
RTRV-COND-DWDM Retrieves condition (state) of current
optical alarms.
See the
“9.6.30 RTRV-COND-DWDM”
section on page 9-52.
Yes Yes Ye s
RTRV-COND-EQPT Retrieves condition (state) of current
general alarms.
See the
“9.6.31 RTRV-COND-EQPT”
section on page 9-53.
Yes Yes Ye s
RTRV-DFLT-SECU Retrieves timeouts for access levels.
See the “9.6.32 RTRV-DFLT-SECU”
section on page 9-55.
No No Yes
RTRV-DWDM Retrieves optical parameters.
See the “9.6.33 RTRV-DWDM”
section on page 9-56.
Yes Yes Ye s
RTRV-EQPT Retrieves power bus mode.
See the “9.6.34 RTRV-EQPT” section
on page 9-58.
Yes Yes Ye s
RTRV-HDR Retrieves header (pings NE).
See the “9.6.35 RTRV-HDR” section
on page 9-59.
Yes Yes Ye s
RTRV-INV Retrieves inventory parameters.
See the “9.6.36 RTRV-INV” section
on page 9-60.
Yes Yes Ye s
RTRV-NE-GEN Retrieves general IP-related parameters.
See the “9.6.37 RTRV-NE-GEN”
section on page 9-61.
Yes Yes Ye s
RTRV-RFILE Retrieves files on FFS.
See the “9.6.38 RTRV-RFILE”
section on page 9-62.
Yes Yes Ye s
Table 9-7 TL1 Commands and Messages Security Permissions (Access Levels) (continued)
Command or Message Description
User Access Levels
RRWRWA