Specifications

6-31
Cisco ONS 15216 EDFA2/EDFA2-A Operations Guide, R2.4
July 2004
Chapter 6 ASH Commands
6.10.2 manufacturer restore defaults all Command
Syntax Description manufacturer restore defaults passwords
Restores the manufacturing factory default passwords to the ONS 15216 EDFA2.
Note If the password for the CISCO15 user is lost and there are not other users with read_write_admin access
level in the system, the password for CISCO15 can be reset by following the procedure in “10.2.9 Lost
Password” section on page 10-12.
6.10.2 manufacturer restore defaults all Command
Command Types manufacturer restore defaults all
Syntax Description
manufacturer restore defaults all
Restores the manufacturing factory settings to the ONS 15216 EDFA2 and resets the unit. The files on
the flash file system (FFS), the date and time, and the values of manufacturing calibration are not
affected. When this command is entered the unit resets itself.
Warning This command resets the IP address, resets the hostname, deletes the user directory, reverts CISCO15
to the default password, and resets other parameters to restore the unit to its state as shipped from
manufacturing.