Specifications

6-5
Cisco ONS 15216 EDFA2/EDFA2-A Operations Guide, R2.4
July 2004
Chapter 6 ASH Commands
6.1 Summary of Security Permissions for ASH Commands
snmp table display Displays a table.
See the “6.6.13 snmp table display Command”
section on page 6-22. See also “5.5.1 Display
Trap Command” section on page 5-30, the
“5.6.1 IP Address” section on page 5-32, and
the “5.6.9 Alarm Entry” section on page 5-44.
No Yes Yes
snmp table get Gets a table.
See the “6.6.14 snmp table get Command”
section on page 6-23.
No Yes Yes
snmp table list Lists a table.
See the “6.6.15 snmp table list Command”
section on page 6-23.
No Yes Yes
snmp trap send Sends a SNMP trap. No Yes Yes
snmp tree attribute list Lists the attributes in the MIB.
See the “6.6.16 snmp tree attribute list
Command” section on page 6-24.
No Yes Yes
snmp tree mib list Lists the MIBs in the MIB tree. No Yes Yes
snmp tree oid display Displays object identifier (OID) for a MIB tree
object.
No Yes Yes
snmp tree syntax display Displays the syntax of a MIB tree object. No Yes Yes
snmp tree table provided
list
Lists provided tables in the MIB tree. No Yes Yes
srom cfg boot display Displays the serial ROM boot content.
See the “6.2.1 srom cfg boot display
Command” section on page 6-7.
No Yes Yes
srom cfg boot modify Modifies the serial ROM boot contents.
See the “6.2.2 srom cfg boot modify
Command” section on page 6-7.
No Yes Yes
srom cfg debug display Displays one config (CFG) ROM byte. No No Yes
srom cfg debug modify Modifies one CFG ROM byte. No No Yes
srom cfg display Displays CFG ROM contents. No Yes Yes
srom cfg ip display Displays the serial ROM IP contents.
See the “6.2.3 srom cfg ip display Command”
section on page 6-8.
No Yes Yes
srom cfg ip modify Modifies the serial ROM IP contents.
See the “6.2.4 srom cfg ip modify Command”
section on page 6-8
No Yes Yes
srom cfg modify Modifies CFG ROM contents. No Yes Yes
srom id display Displays serial ROM contents. No Yes Yes
tl1c TL1s to host. Yes Yes Yes
Table 6-1 ASH Commands Security Permissions (Access Levels) (continued)
Command Description
User Access Levels
RRWRWA