Specifications

5-37
Cisco ONS 15216 EDFA2/EDFA2-A Operations Guide, R2.4
July 2004
Chapter 5 SNMP MIB Configuration
5.6.5 Power Bus
5.6.4.3 Case Temperature Alarm Hysteresis
5.6.4.3.1 CtmpMaxHysteresis
Command Types snmp attribute get local cerent15216EdfaCtmpMaxHysteresis
Syntax Description snmp attribute get local cerent15216EdfaCtmpMaxHysteresis
Displays maximum case temperature alarm hysteresis.
The cerent15216EdfaCtmpMaxHysteresis attribute in the cerent15216EdfaCfgGroup display command
shows the maximum case hysteresis temperature alarm threshold (Example 5-14 on page 5-36). Refer to
Table 5-13 on page 5-16 for information about all of the parameters in cerent15216EdfaCfgGroup.
5.6.4.3.2 CtmpMinHysteresis
Command Types snmp attribute get local cerent15216EdfaCtmpMinHysteresis
Syntax Description snmp attribute get local cerent15216EdfaCtmpMinHysteresis
Displays the minimum case hysteresis temperature alarm threshold.
The following command displays case temperature alarm hysteresis and other data:
• snmp row display local cerent15216EdfaCfgGroup command
The cerent15216EdfaCfgGroup command is shown in Example 5-14 on page 5-36. For information
about all of the parameters in the cerent15216EdfaCfgGroup table, see Table 5-13 on page 5-16.
5.6.5 Power Bus
5.6.5.1 Power Bus Mode
Command Types snmp attribute get local cerent15216EdfaPowerBusMode
Syntax Description snmp attribute get local cerent15216EdfaPowerBusMode
Displays the power bus mode (simplex or duplex).
The following command displays power bus voltage and other data:
• snmp row display local cerent15216EdfaCfgGroup command