Specifications

3-11
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
Chapter 3 Configuration
Filter Setup
Figure 3-7 Protocol Filter Set Page
Step 9 Select forward or block from the Disposition pull-down menu to forward or
block the protocol traffic, or leave this setting at default to use the default
disposition that you selected for the filter set in Step 6.
Step 10 Select a priority for the protocol from the Priority pull-down menu. The menu
includes the following options:
• background—Use this setting for bulk transfers and other activities that are
allowed on the network but should not impact network use by other users and
applications.
• default—This setting is the same as best effort, which applies to normal LAN
traffic.
• excellentEffort—Use this setting for a network’s most important users.
• controlledLoad—Use this setting for important business applications that are
subject to some form of admission control.
• interactiveVideo—Use this setting for traffic with less than 100 ms delay.
• interactiveVoice—Use this setting for traffic with less than 10 ms delay.
• networkControl—Use this setting for traffic that must get through to maintain
and support the network infrastructure.
Step 11 Enter milliseconds in the Time-to-Live entry fields. If you leave these settings at
0, the protocol adopts the default time-to-live values you entered in Step 7.