Specifications

Chapter 3 Configuration
Filter Setup
3-10
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
Figure 3-6 Filter Set Page
Step 6
Select forward or block from the Default Disposition pull-down menu. This
setting is the default action for the protocols you include in the filter set. You can
override this setting for specific protocols.
Step 7 In the Default Time to Live fields, enter the number of milliseconds unicast and
multicast packets should stay in the access point’s buffer before they are
discarded. These settings will be the default time-to-live values for the protocols
you include in the filter set, but you can override the settings for specific
protocols. If you leave these settings at 0, the time-to-live settings default to 3
seconds for multicast packets and 5 seconds for unicast packets.
Step 8 Type the name or the ISO numeric designator for the protocol you want to add in
the Special Cases entry field and click Add New. For example, to add Telnet to an
IP port filter set, type telnet or 23.
The Protocol Filter Set page appears. Figure 3-7 shows the Protocol Filter Set
page.