Specifications

Chapter 9 Diagnostics and Troubleshooting
Using Diagnostic Pages
9-4
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
Figure 9-2 Antenna Alignment Test Window
In this example, only one wireless networking device is in range of the access
point, making it easy to see the relevant data. If results for several devices were
displayed, it would be difficult to focus on the device with which you were trying
to align the access point’s antenna.
Each data sample is listed in the data columns. The columns provide the following
information:
• ID—The sequence number of the data sample. The most recent sample
appears at the top of the column.
• Name—The system name of each device in the alignment test.
• Address—The MAC address of each device in the alignment test.
• Signal Strength—The signal strength between the access point and the other
device. The left side of the Strength column displays the percentage of signal
strength between the access point and the other device, and the right side of
the column displays signal strength in dBm.