Specifications

Chapter 5 Network Management
Using the Association Table
5-10
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
Note If you need to stop the link test before the test is complete, click Stop
Test.
A results window appears listing the test results. To run the test again, click Test
Again. To run a continuous link test, click Continuous Test. Figure 5-4 shows a
link test results window.
Figure 5-4 Link Test Results Window
Clearing and Updating Statistics
Use the Clear Stats and Refresh buttons to clear and update the Station page
statistics.
• Clear Stats—Clears all packet, octet and error counts and resets the counters
to 0.
• Refresh—Updates the counts to their latest accumulated values, and saves the
Alert selections.