Specifications

5-7
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
Chapter 5 Network Management
Using the Association Table
From Station Information
Fields in the To Station column contain the following information:
• Alert—Click this box if you want detailed packet trace information captured
for the Association Table page. This option is only available to users with
Administrator capability.
• Packets OK—Reports the number of good packets sent from the station.
• Total Bytes OK—Reports the number of good bytes sent from the station.
• Total Errors—Reports the total number of packet errors sent from the station.
• WEP Errors—Reports the number of encryption errors sent from the station.
Rate, Signal, and Status Information
The table under the To and From Station table lists rate, signal, and status
information for the device.
Data rate and signal quality information appears on Station pages for client
devices. On Station pages for access points, this area shows network information
such as system uptime.
• Parent—Displays the system name of the device to which the client, bridge
or repeater is associated. The entry [self] indicates that the device is
associated with this access point.
• Current Rate—Reports the current data transmission rate. If the station is
having difficulty communicating with the access point, this might not be the
highest operational rate.
• Latest Retries—Tally of short and long data retries.
• Next Hop—If repeater access points are used on the network, this field names
the next access point in the repeater chain.
• Operational Rates—The data transmission rates in common between the
access point and the station.
• Latest Signal Strength—Displays the current index of radio signal quality.
The following four fields appear only on the Station page for an access point:
• Stations Associated—Displays, by number and class, all stations associated
with the access point.