Specifications

Chapter 5 Network Management
Using the Association Table
5-6
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
• Status—This field indicates the device’s operating status. Possible statuses
include:
– OK—The device is operating properly.
– EAP Pending
– EAP Autenticated
– IP Forwarding Agent
– BootP/DHCP Client—The device is using BOOTP or DHCP protocol
– ARP Proxy Server
– IP Virtual Router
– WEP—WEP is enabled on the device.
To Station Information
Fields in the To Station column in the second table on the Station page contain the
following information:
• Alert—Click this box if you want detailed packet trace information captured
for the Association Table page. This option is only available to users with
Administrator capability.
• Packets OK—Reports the number of good packets coming to the station.
• Total Bytes OK—Reports the number of good bytes coming to the station.
• Total Errors—Reports the total number of packet errors coming to the station.
• Max. Retry Pkts.—Reports the number of times data packets have reached the
maximum long or short retry number. Set the maximum RTS value on the AP
Radio Hardware page; see the “Entering Radio Hardware Information”
section on page 3-21 for instructions.
• RTS (Short) Retries—Reports the number of times the RTS packet had to be
retried.
• Data (Long) Retries—Reports the number of times the data packet had to be
retried.