Specifications

Chapter 4 Security Setup
Setting Up MAC-Based Authentication
4-30
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
Step 4 If you plan to create a MAC address list that will be checked by the authentication
server, select Yes for the option called Lookup MAC Address on Authentication
Server if not in Existing Filter List. With this option enabled, the access point
checks the authentication server’s MAC address list when a client device attempts
to authenticate.
Step 5 Click Apply to save the list of MAC addresses in the access point management
system.
Step 6 Click the Authentication Server link to go to the Authenticator Configuration
page. Figure 4-11 shows the Authenticator Configuration page.
Figure 4-11 Authenticator Configuration Page
You can configure up to four servers for authentication services, so you can set up
backup authenticators. If you set up more than one server for the same service, the
server first in the list is the primary server for that service, and the others are used
in list order when the previous server times out.
Step 7 Enter the name or IP address of the authentication server in the Server Name/IP
entry field.