Specifications

4-29
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
Chapter 4 Security Setup
Setting Up MAC-Based Authentication
Figure 4-10 Address Filters Page
Note Step 2 and Step 3 describe entering MAC addresses in the access point
management system. If you will enter MAC addresses only in a list used by the
authentication server, skip to Step 4.
Step 2 Type a MAC address in the Dest MAC Address field. You can type the address
with colons separating the character pairs (00:40:96:12:34:56, for example) or
without any intervening characters (004096123456, for example).
Make sure the Allowed option is selected under the Dest MAC Address field.
Step 3 Click Add. The MAC address appears in the Existing MAC Address Filters list.
The MAC address remains in the management system until you remove it. To
remove the MAC address from the list, select it and click Remove.
Note Be sure to enter your own MAC address in the list of allowed addresses.