Specifications

4-7
Content Services Switch Getting Started Guide
78-11766-01
Chapter 4 Configuring the CSS
Using the Configuration Script
To accept the script default values, press the Enter key at the prompts.
Creating Layer3 load balancing
Enter service name: [default = Server1]
Enter service IP address: [default = 192.168.10.3] 192.168.3.58
Create another service? [y/n]? y
Enter service name: [default = Server2]
Enter service IP address: [default = 192.168.10.3] 192.168.3.59
Create another service? [y/n]? n
Enter Virtual IP address for L3_Rule: [default = 192.168.10.4]
192.168.3.6
After the configuration is completed, the script automatically:
• Displays the running-config
• Saves the running-config to the startup-config
Showing the Running Config
!Generated MAR 6 17:53:49
!**************** GLOBAL *****************
ip route 0.0.0.0 0.0.0.0 192.168.3.3
!**************** CIRCUIT ****************
circuit VLAN1
ip address 192.168.3.6 255.255.255.0
!**************** SERVICE ****************
service Server1
ip address 192.168.3.58
active
service Server2
ip address 192.168.3.59
active