Specifications

Chapter 2 Cabling the CSS
Cabling the CSS 11050 and CSS 11150
2-2
Content Services Switch Getting Started Guide
78-11766-01
Figure 2-1 CSS 11151 Content Services Switch
The CSS 11050 configuration supports:
• 8 auto-sensing 10/100-Mbps Ethernet (10BASE-T/100BASE-TX) interfaces
• Optional integrated Gigabit Ethernet Network Interface Card (GENIC) with
one uplink port
The CSS 11150 configuration supports:
• 12 auto-sensing 10/100-Mbps Ethernet (10BASE-T/100BASE-TX)
interfaces
• Optional integrated Gigabit Ethernet Network Interface Card (GENIC) with
two GBIC ports, in either 4 MB or 8 MB per port versions
• Optional integrated Fast Ethernet Network Interface Card (FENIC) with four
SC connectors for uplinks
• Optional integrated Fast Ethernet Network Interface Card (FENIC) with four
additional auto-sensing 10/100-Mbps Ethernet (10BASE-T/100BASE-TX)
interfaces for a total of 16 interfaces
CSS 11050 and CSS 11150 Rear Panel Connectors and LEDs
The CSS 11050 and CSS 11150 have connectors and LEDs on their front and rear
panels. The rear panel has an AC connector (or DC connector on a CSS 11150),
an Ethernet management RJ-45 connector, and the associated Ethernet
Link/Activity, 10/100 (Mbps), and Duplex (Half or Full) LEDs, as shown in
Figure 2-2.
49574