Specifications

1-15
Content Services Switch Getting Started Guide
78-11766-01
Chapter 1 Unpacking and Installing the CSS
Installing a CSS 11800 Module
Installing a CSS 11800 Module
This section applies to the CSS 11800 modules only and contains the following
sections:
• Installation Precautions and Restrictions
• Unpacking a CSS 11800 Module
• Installing a Module
• Installing a Passive SCM or SFM
Installation Precautions and Restrictions
This section includes background material related to installing a module into the
CSS 11800 chassis. It is recommended that you read the topics in this section
before installing a module.
Installation Precautions
The CSS 11800 design enables you to install and remove modules without
powering down the chassis (hot swap). Read and observe the following
precautionary information prior to servicing the CSS 11800.
Warning Do not remove or install modules without using appropriate
anti-static guard measures. The CSS includes an anti-static wrist
strap in the Accessory kit. Attach the copper tape end of the strap
to an unpainted metal surface on the chassis. You can leave the
strap connected to the chassis when you are done.
Warning If you do not power down the CSS 11800, an electrical energy
hazard is present within the chassis. Prior to installing or
removing components, remove all metallic objects from hands and
wrists to prevent bridging of live contact points.