Specifications

Chapter 1 Unpacking and Installing the CSS
Installing the CSS 11800
1-14
Content Services Switch Getting Started Guide
78-11766-01
Rack-Mounting the CSS 11800 Chassis
Once the mounting brackets are installed, you are ready to install the CSS 11800
chassis.
Warning The weight and position of the CSS 11800 chassis within the
cabinet may make the cabinet top-heavy or unstable. Take all
necessary precautions to anchor the cabinet securely before
installing the chassis.
To install the CSS 11800 chassis into a cabinet:
1. Locate the mounting keys on the left and right mounting brackets (see Figure
1-4). Mounting keys are designed to fit over pan-head screws installed in the
mounting rack to hold the chassis in place while you secure the chassis into
the rack.
2. Install a pan-head screw into the left and right sides of the mounting rack.
These screws fit into the mounting keys and hold the chassis.
3. Raise the CSS to the appropriate installation height and place the mounting
keys over the installed pan-head screws. The CSS is now held in place by the
mounting keys so you can install the remaining screws.
4. Align the screw holes on the mounting bracket with the screw holes on the
equipment cabinet and install the pan-head screws through the CSS and
cabinet brackets. The CSS 11800 requires five pan-head screws for each side
of the chassis.