Specifications

Chapter 1 Unpacking and Installing the CSS
Installing the CSS 11800
1-12
Content Services Switch Getting Started Guide
78-11766-01
Figure 1-5 Screw Holes on the CSS 11800 Bracket for Front and Extended
Mounting
To change the location of the mounting brackets on the CSS 11800 chassis from
a front-mount position to an extended-mount position:
1. Remove the seven front mounting bracket screws from one side of the
chassis.
2. Align the rear screw holes on the bracket with the screw holes on the front
side of the chassis. Note the bracket’s proper orientation as shown in Figure
1-6.
Screw holes for
the front-mounting
of the 11800 chassis
in a cabinet
Screw holes for the
extended-mounting
of the 11800 chassis
in a cabinet
Front Front
Left bracket Left bracket
49570