Specifications

Chapter 1 Unpacking and Installing the CSS
Installing the CSS 11800
1-10
Content Services Switch Getting Started Guide
78-11766-01
Mid-Mounting the CSS 11800 Brackets
To change the location of the mounting brackets on the CSS 11800 chassis from
a front-mount position to a mid-mount position (refer to Figure 1-4):
1. Remove the seven front mounting bracket screws from one side of the
chassis.
2. Position the mounting bracket onto the middle of one side of the CSS, lining
up the front screw holes on the bracket with the holes on the side of the
chassis.
Figure 1-4 Aligning Brackets on the CSS 11800 for Mid-Mounting
3. Using a Phillips screwdriver, install only five of the seven #10-32 pan-head
screws through the mid-mount bracket holes into the CSS. Do not install the
screws in the top of the bracket or second from the bottom of the bracket.
49569
Mounting
bracket
Mounting
key
Mounting
bracket
Mounting
key