Specifications

Chapter 1 Unpacking and Installing the CSS
Unpacking the CSS
1-4
Content Services Switch Getting Started Guide
78-11766-01
Unpacking the CSS
The CSS is shipped in a protective shipping carton. The CSS 11050 and CSS
11150 are shipped as a self-contained chassis; no modules or components can be
added or removed. The CSS 11800 is shipped with the power supply, fan unit,
SCM, and SFM preinstalled. You must install all separately ordered items (for
example, I/O modules or a redundant AC or DC power supply) into the
CSS 11800.
This section describes:
• Unpacking the CSS 11050 or CSS 11150
• Unpacking the CSS 11800
Unpacking the CSS 11050 or CSS 11150
To unpack the CSS 11050 or CSS 11150:
1. Remove the CSS and all accessories from the shipping carton.
2. Check the configuration of the CSS and the accessories against the items
listed on the packing slip. Report any discrepancies as described in “If the
Product is Damaged” in this chapter.
3. To install the CSS 11050 or CSS 11150, go to “Installing the CSS 11050 or
CSS 11150”.
Unpacking the CSS 11800
The CSS 11800 is shipped attached to a wooden pallet with screws and shipping
brackets. Due to the large size and weight of a unit, move it to the installation site
before unpacking it from the shipping carton.
To unpack the CSS 11800:
1. Remove all enclosed packing materials. Save the packing materials in case
you need to repack the CSS later.
2. Remove the accessories from the shipping carton.