Specifications

16 Second-Generation Channel Interface Processor (CIP2) Installation and Configuration
CIP2 Installation Prerequisites
Figure 4 shows the interface processor end of the Cisco 7000, which provides access to the seven
processor slots and the removable power supplies. When facing the interface processor end of the
chassis, the SP (or SSP) and RP slots are on the far right. The five interface processor slots are
numbered 0 to 4 from left to right and are reserved for interface processors, including the CIP2.
Figure 4 Cisco 7000 with RP and SP (or SSP) Installed (Interface Processor End)
H2358
Slot 0
1
2
3 4 SP
or
SSP
RP
slot
Upper
power supply
Lower
power supply
I
O
DC FAIL
AC POWER
I
O
DC FAIL
AC POWER
Captive
installation screw
Captive
installation screw