User guide

2-12 Cisco 1005 User Guide
Connecting to the Network and Powering Up the Router
Step 4 Align the bottom of the PCMCIA door with the bottom of the PCMCIA slot. (See
Figure 2-7.) Then push the top of the door toward the rear panel until the plastic
tabs snap into place. Replacing the door prevents dust from entering the chassis.
Note If you cannot close the door completely, the Flash memory card might not be seated
completely in the connector (inside the router). Press the black plastic eject button at the
right side of the slot (see Figure 2-6) to remove the Flash memory card. Then reinsert the
card and replace the door.
Figure 2-7 Replacing the PCMCIA Door
H3809
12VDC
Tabs