Specifications

System Specifications 3-37
Catalyst 5000
Catalyst 5000
The following section describes the physical specifications and external connection requirements for
the Catalyst 5000 series switch.
Physical Specifications
Table 3-25 lists the physical specifications for the Catalyst 5000 series switch.
Table 3-25 Catalyst 5000 Series Switch Physical Specifications
1. Gbps = gigabits per second.
2. Btu = British thermal units.
3. cfm = cubic feet per minute.
4. UL = Underwriters Laboratory.
5. CSA = Canadian Standards Association.
6. EMI = electromagnetic interference.
Description Specifications
Backplane 1.2-Gbps
1
, 5 module connections
Dimensions (H x W x D) 10.4 x 17.25 x 18.4 in. (26.4 x 43.1 x 46.0 cm)
Chassis depth including cable guide is 21.64 in. (55.0 cm)
Weight Chassis only: 43 lb (19.5 kg)
Chassis fully configured with 1 supervisor engine module, 4 switching modules,
and 2 power supplies: 84 lb (39 kg)
DC voltages supplied
and steady-state maximum current
ratings
+5V @ 70A
+12V @ 2A
+24V @ 0.2A
Power supply 376W maximum (AC-input power supplies)
Power dissipation 350W maximum configuration, 110W typical with maximum configuration
Heat dissipation 563W (1919 Btu
2
/hr)
Input voltage 100 to 240 VAC wide input with power factor corrector
Frequency 47 to 63 Hz autoranging
AC current rating 8A maximum at 100-127 VAC, 4A maximum at 200 to 240 VAC with the
chassis fully configured
Airflow 95 cfm
3
through the system fan assembly
Operating temperature 32 to 104 F (0 to 40 C)
Nonoperating temperature – 40 to 167 F (– 40 to 75 C)
Humidity 10 to 90%, noncondensing
Agency approvals Safety: UL
4
1950, CSA
5
-C22.2 No. 950-93, and EN60950
EMI
6
: FCC Class A (47 CFR, Part 15),CE Mark, EN55022 Class B and VCCI
Class 2 with shielded cables