Specifications

System Specifications 3-3
Cisco 1000 Series
Cisco 1000 Series
This section contains the physical specifications and external connection requirements for the
Cisco 1000 series, which includes the following models: the Cisco 1001 LAN Extender, the
Cisco 1003, Cisco 1004, and the Cisco 1005 routers.
Physical Specifications
Table 3-2 lists the physical specifications for the Cisco 1000 series models.
Table 3-2 Cisco 1000 Series Physical Specifications
External Connections
This section contains the external connection requirements for the Cisco 1000 series.
• Ethernet attachment unit interface (AUI) using a DB-15 connector
• Ethernet 10BaseT interface using an RJ-45 connector.
• X.21 synchronous serial, data terminal equipment (DTE) interface, using a DB-15 connector.
• V.35 synchronous serial, nonreturn to zero (NRZ) interface, using a 34-pin connector.
• ISDN BRI interface using an RJ-45 connector. The port is labeled “ISDN S/T” on the Cisco 1003
router and “ISDN U” on the Cisco 1004 router. The Cisco 1004 router includes an integrated
NT1 device.
• Synchronous serial port using a DB-60 connector. Supports the following interfaces:
EIA/TIA-232, EIA/TIA-449, V.35, X.21, and EIA-530.
• EIA/TIA-232 console port using an RJ-45 connector.
• EIA/TIA-232 console/asynchronous serial port using an RJ-45 connector.
• One external PCMCIA Type-2 slot for an integrated modem, V.34 speed.
Description Design Specification
Dimensions (H x W x D) 1.75 x 8.0 x 8.3 in (4.5 x 20. x 21 cm)
Weight 6.0 lb (2.75 kg)
Input voltage 12 VDC
External power supply: 100 to 240 VAC
Frequency 50 to 60 Hz
Power dissipation 12W (maximum), 135.5 Btus/hour
Operating temperature 32 to 104 F (0 to 40 C)
Nonoperating temperature – 40 to 185 F (– 40 to 85 C)
Humidity (noncondensing) 10 to 90%