Specifications

Cisco AS5200 Universal Access Server
Cisco Site Preparation Guide
3-16
Cisco AS5200 Universal Access Server
This section contains the physical specifications and external connection requirements of the
Cisco AS5200 universal access server.
Physical Specifications
Table 3-16 lists the physical specifications for the AS5200 access server.
Table 3-16 Cisco AS5200 Universal Access Server Physical Specifications
External Connections
The Cisco AS5200 access server has a 19-inch modular chassis that accommodates up to three
feature cards. The feature cards should be a combination of one or two WAN cards and one or two
modem carrier cards.
The types of cards and their external connection requirements are as follows:
• Dual T1 Primary Rate Interface (PRI) card with integrated channel service units (CSUs)
The dual T1 PRI card routes incoming digital T1 lines to the modem modules. It uses RJ-48C
connectors.
Description Specification
Dimensions (H x W x D) 3.5 x 17.5 x 15 in two rack units (8.89 x 44.45 x 38.1 cm)
Weight 25 lb (11.4 kg)
Input voltage, AC power supply
Current frequency
Power dissipation
100 to 240 VAC
1.0 to 2.0A50 to 60 Hz
180W (maximum), 135.5 Btus/hour
Input voltage, DC power supply
Maximum input current
Typical input current
Power dissipation
Output voltage
– 48 to – 60 VDC
6.0A
4.0A
180W (maximum)
5.0 VDC
Alarm relay rating
Voltage
Current
Maximum switching power
Maximum switching voltage
48 VDC
3A
150W
220 VAC
Operating temperature 32 to 104 F (0 to 40 C)
Nonoperating temperature – 40 to 185 F (– 40 to 85 C)
Operating humidity 5 to 95%, noncondensing
Noise level 34 dB @ 3 ft (0.914 m)