Specifications

Cisco 4000 Series
Cisco Site Preparation Guide
3-14
Cisco 4000 Series
Following are the physical specifications and external connection requirements for the Cisco 4000
series products, which include the Cisco 4000-M, the Cisco 4500-M, and the Cisco 4700-M.
Physical Specifications
Table 3-15 contains the physical specifications for the Cisco 4000 series products.
Table 3-15 Cisco 4000 Series Physical Specifications
External Connections
This section contains external connection requirements for the Cisco 4000 network processor
modules, along with the other connections on the Cisco 4000 chassis.
Network Processor Modules
All Cisco 4000 series models provide a configurable modular router platform using network
processor modules (NPMs), individual removable cards used for external network connections.
The Cisco 4000 series routers can support combinations of up to three of the following NPMs:
• 1-, 2-, or 6-port Ethernet
Ethernet interface supported: IEEE 802.3 using attachment unit interface (AUI), DB-15
connectors, and 10BaseT using RJ-45 connectors.
• 1- or 2-port Token Ring
Token Ring interfaces use DB-9 to IEEE 802.5, media attachment unit (MAU) connectors.
• 1-port, both single and dual attachment station (DAS), multimode FDDI
The multimode network processor module connectors are FDDI-standard physical sublayer
(PHY) connectors. The media interface connector (MIC) connects to FDDI standard 62.5/125
micron multimode fiber optic cable. The module also has an optical bypass switch connector
using a 6-pin DIN connector.
Description Specification
Dimensions (H x W x D) 3.4 x 17.6 x 17.7 in (8.6 x 44.7 x 43.4 cm)
Weight 24 lb (10.9 kg)
Power (heat) dissipation 200W (682.6 Btu/hr)
Input voltage, current, and
frequency
100 to 240 VAC, 3.0 to 1.5A, 47to 63 Hz
Operating temperature 32 to 104 F (0 to 40 C)
Nonoperating temperature – 40 to 185 F (– 40 to 85 C)
Humidity (noncondensing) 5 to 95%
Air flow and fan noise Fan rated at 31 cfm, at 52 dBa
Agency approvals UL 1950, CSA 22.2, TÜV-GS mark, EN 60950, FCC Class A, Canadian DOC
Class A, VDE Class B, EN 55022 Class B, VCCI Class 2