User Manual

1-Port G.SHDSL WAN Interface Card for Cisco 2600 Series Routers
dsl operating-mode (G.SHDSL)
20
Cisco IOS Release 12.2(4)XL
Examples The following example shows how to configure DSL ATM interface 0/0 to operate in G.SHDSL mode:
Router# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)# interface atm 0/0
Router(config-if)# dsl operating-mode gshdsl symmetric annex A
Router(config-if)# end
Router# clear interface atm 0/1
Router#
Related Commands Command Description
dsl equipment-type Configures the DSL ATM interface to function as central office equipment
or customer premises equipment.
dsl linerate Specifies a line rate for the DSL ATM interface.