Router Installation Guide

3-23
Cisco XR 12410 Router Installation Guide
OL-13832-01
Chapter 3 Installing the Cisco XR 12410 Router
Rack-Mounting the Router Chassis
Installing the Chassis in the Rack
Two people can lift an empty router chassis using the handles on the sides. To
accommodate racks with different hole patterns in their mounting flanges, the
chassis rack-mounting flanges have three groups of eight oblong screw holes on
each side.
This section describes how to install the chassis in a telco rack.
Figure 3-16 shows the orientation of the chassis to the rack posts.
Figure 3-16 Router and Rack Posts
53229
Front panel
of chassis
Rack
Rear panel
of chassis
Rack-mount bracket
(attached to rack posts)