Router Installation Guide

Chapter 4 Troubleshooting the Installation
Troubleshooting the Processor Subsystem
4-32
Cisco XR 12410 Router Installation Guide
OL-13832-01
DIAG
MODE
Diagnostic mode. RP
DIAG
LOAD
Downloading field diagnostics over the MBus. RP
DIAG
F_LD
Downloading field diagnostics over the fabric. RP
DIAG
STRT
Launching field diagnostics. RP
DIAG
HALT
Cancel field diagnostics. RP
DIAG
TEST
Running field diagnostics tests. RP
DIAG
PASS
1
Field diagnostics completed successfully. RP
POST
STRT
Launching power-on self-test (POST). RP
UNKN
STAT
Unknown state. RP
ADMN
DOWN
Line card is administratively down. RP
SCFG
PRES
1
Incorrect hw-module slot srp command entered. RP
SCFG
1
REDQ
Required hw-module slot srp command not entered. RP
1. This LED sequence only appears in Cisco IOS XR OL-13832-01 or later.
2. The fabric downloader loads the Cisco IOS XR software image onto the line card.
Table 4-7 Troubleshooting Using Other Alphanumeric Display Messages (continued)
Display Meaning Source