Router Installation Guide

Chapter 3 Installing the Cisco XR 12410 Router
Rack-Mounting the Router Chassis
3-24
Cisco XR 12410 Router Installation Guide
OL-13832-01
Use the following procedure to install the chassis in the equipment rack:
Step 1 Using two people, lift the chassis into the rack using the side handles and grasping
underneath the power supply bays (
Figure 3-17).
Warning An empty chassis weighs approximately 125 pounds (56.7 kg). You need two
people to slide the chassis into the equipment rack safely.
• If you are using the rack-mount brackets, raise the chassis to the level of the
brackets. Let the bottom of the chassis rest on the brackets, but continue to
support the chassis.
Figure 3-17 Correct Lifting Positions
Caution Do not grasp the card cage or the air filter door when lifting the router chassis.
(Figure 3-18.)
50837