Router Installation Guide

Chapter 3 Installing the Cisco XR 12406 Router
Connecting to the Console and Auxiliary Ports
3-16
Cisco XR 12406 Router Installation Guide
OL-13831-01
Check your terminal’s documentation to determine the baud rate of the terminal
you plan to use. If your documentation does not specify settings use the following
terminal settings:
1. Baud to 9600
2. Data bits to 8
3. Parity to no parity
4. Stop bits to 2
The console port requires a straight-through RJ-45 cable.
Note To comply with Telcordia GR-1089 NEBS standard for electromagnetic
compatibility and safety, connect all console, auxiliary, Ethernet, and BITS
interfaces only to intrabuilding or non-exposed wiring or cabling. The
intrabuilding cable must be shielded and the shield must be grounded at both ends.
Figure 3-8 PRP Console and Auxiliary Port Connections
1 Modem 4 Auxiliary port
2 Console terminal 5 Console port
3 RJ-45 Ethernet cables – —
70692
R
X
T
X
PRIMARY
S
LO
T
-1
S
L
O
T
-0
L
IN
K
E
N
R
X
T
X
ETH 1ETH 0 AUX
CONSOLE
L
IN
K
PRIMARY
E
N
1
3
4
5
2