Router Installation Guide

3-11
Cisco XR 12406 Router Installation Guide
OL-13831-01
Chapter 3 Installing the Cisco XR 12406 Router
Supplemental Bonding and Grounding Connections
Use a dual-hole lug to connect to the chassis with two 6.3-mm (M6) screws on the
0.63-inch (16-mm) centers as shown in Figure 3-4 and Figure 3-5. The lug can be
ordered from Cisco (Part Number 32-0607-01).
Figure 3-5 Cable Lug
The dual-hole lug is crimped onto a grounding wire of a wire size and length
determined by your router location and facility environment. The crimping tool
shown in Figure 3-6 is a standard crimping tool obtainable from many sources.
Crimp area
25527
2.24
0.48
0.08
0.25 0.370.63
End View
Ø 0.267
2 holes
All measurements in inches