Router Installation Guide

5-39
Cisco XR 12406 Router Installation Guide
OL-13831-01
Chapter 5 Maintaining the Router
Removing and Replacing a DC PDU
Step 10 Reinstall the PEMs:
a. Slide each PEM into its bay until it mates with its PDU connector.
Caution To prevent damage to the connectors, do not use excessive force when
inserting the power supply into the chassis.
b. Close the ejector levers and tighten the captive screws to securely seat the
power supply to the chassis (Figure 5-25).
c. Repeat steps a. and b. for the second power supply.
Figure 5-25 Seating a DC Power Supply
101117
O
U
TP
U
T
O
K
IN
P
U
T
O
K
M
IS
W
IR
E