User's Manual

Catalyst 3560-C and 2960-C Switch Getting Started Guide

OL-23802-02

Catalyst 3560-C and 2960-C Switch Getting Started Guide

Note For instructions on mounting the switch under a desk or on a wall, see the

hardware installation guide on Cisco.com.

To secure the switch on top of or under a desk or a shelf, use the mounting

template and three mounting screws.

1. Position the mounting template on the mounting surface with the two

side-by-side slots forward. Peel the adhesive strip off the bottom, and attach

the template.

2. Use a 0.144-inch (3.7 mm) or a #27 drill bit to drill a 1/2-inch (12.7 mm) hole

in the three template screw slot positions.

3. Insert the screws in the slots on the template, and tighten until they touch the

template. Remove the template from the mounting surface.

Note Use the supplied number 8 Phillips pan-head screws, or use larger

pan-head screws to securely mount the switch.

1 Mounting template 3 Desk or shelf

2 Screws

210096