QUICK INSTALLATION GUIDE Wireless-G IP Phone Model: Package Contents • • • • • • • Handset Phone Charger Power Adapter Li-ion Battery USB Cable Quick Installation Guide Read Me First Card WIP310
1 Installation A. Insert the battery into the phone. It will only fit one way. Do not force. Battery Placement B. Plug the power adapter into the charger and then plug the adapter into a wall outlet Charger Power Adapter Plug C. Charge the phone by placing the handset into the charger. The phone will display a charging icon on the screen. NOTE: The battery needs to charge for at least 8 hours prior to using the phone. Do not power on the phone until left to charge for at least 8 hours.
2 Configuration Handset Navigation Pad To navigate through the phone menus, use the Navigation Pad. The select button is the silver button in the middle of the navigation pad. The arrows are used to move up, down, left and right through the phone menus. Navigation Pad The Wireless-G IP Phone requires that you have phone service through a VoIP provider to make phone calls.
Automatic Configuration via Wi-Fi Protected Setup To automatically set up a secure wireless connection to your router, use Wi-Fi Protected Setup. Your router must support this feature to use this method. NOTE: Look for the Wi-Fi Protected Setup button on your router. If you are not sure that your router supports this feature, consult your User Guide. Wi-Fi Protected Setup button A. Press the Power/End Call button to power on the phone. Power/End Call button B.
E. Follow the phone’s onscreen instructions to connect your phone to your network using Wi-Fi Protected Setup. Wi-Fi Protected Setup Instructions F. The phone will display a message if the connection is successful. NOTE: If the connection is successful, the phone will create a Wi-Fi Profile automatically. To view, edit, or manage your Wi-Fi Profiles, see the section below, Manual Configuration.
D. You will see the Wi-Fi Profiles screen list. The list will be empty when configuring your phone for the first time. To search for the available networks, press the left soft key Options, then highlight Scan Networks. Press the select button. Wi-Fi Profiles E. A list of available networks will display. Highlight a network and press the select button. Available Networks F. Follow the phone’s onscreen instructions to connect your phone to your network. G.
IMPORTANT SAFETY INSTRUCTIONS BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY, INCLUDING THE FOLLOWING. •• This device for indoor use only! •• Read and follow all warnings and instructions marked on the product. •• Do not use this product near water, laundry tub, in a wet basement, or near a swimming pool. •• Do not place this product on an unstable table. The product may fall and be damaged.
•• Avoid contact with metal objects when handling the battery. These objects could short out the batteries or cause the conductor to overheat resulting in burns. •• Do not attempt to recharge the battery cell by heating it. Sudden release of battery electrolyte can cause burns or irritation to the eyes or skin. •• Observe the proper polarity, or direction, of any battery. Reverse insertion of the battery cell can result in leakage or explosion.
