Universal Broadband Router Hardware Installation Guide

Contents
viii
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
OL-18259-01
Replacing a Redundant AC PEM 5-22
Replacing Both AC PEMs 5-26
Removing and Replacing the PRE Module 5-28
Removing the PRE Module 5-28
Replacing the PRE Module 5-32
Removing and Installing a PC Media Card 5-34
Removing and Replacing a Timing, Communication, and Control Plus Card 5-36
Removing and Replacing a Network Line Card 5-39
Removing the Network Line Card 5-39
Installing the Network Line Card 5-43
Removing the Half-Height Gigabit Ethernet Line Card and the Slot Splitter 5-45
Removing a Half-Height Gigabit Ethernet Line Card 5-45
Removing the Slot Splitter 5-48
Replacing the Slot Splitter and Half-Height Gigabit Ethernet Line Card 5-50
Installing the Slot Splitter 5-50
Installing the Half-Height Gigabit Ethernet Line Card 5-53
Removing and Replacing an SFP Module 5-56
Types of SFP Modules 5-56
Removing an SFP Module 5-56
Inserting an SFP Module 5-58
Upgrading to a Half-Height Gigabit Ethernet Line Card 5-59
Removing and Replacing a Cable Interface Line Card 5-60
Removing the Cable Interface Line Card 5-60
Installing a Cable Interface Line Card 5-63
Removing and Replacing the Cable Interface Line Card in the Adapter Card 5-65
Removing the Cable Interface Line Card from the Adapter Card 5-65
Installing a Cable Interface Line Card in the Adapter Card 5-68
APPENDIX A Technical Specifications A-1
Cisco uBR10012 Chassis and Chassis Components A-1
Network Uplink Cards and Cable Interface Line Cards A-6
APPENDIX B Cable Specifications B-1
Coaxial Cables B-1
Console and Auxiliary Port Cables and Pinouts B-2
How to Identify an RJ-45 Rollover Cable B-2
Console Port Cables and Pinouts B-3
Auxiliary Port Cables and Pinouts B-4