Universal Broadband Router Hardware Installation Guide
1-44
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
OL-18259-01
Chapter 1 Cisco uBR10012 Universal Broadband Router Overview
Network Uplink Cards
Cisco uBR10-SRP-OC12SML DPT WAN Line Card LEDs
Table 1-22 describes the LEDs and their functions on the Cisco uBR10-SRP-OC12SML DPT WAN line
card.
Ta b l e 1-22 Cisco uBR10-SRP-OC12SML DPT WAN Line Card LEDs and Their Functions
LED Color/Status Description
POWER Green
Off
Power is being supplied to the Cisco uBR10-SRP- OC12SML DPT WAN line
card
Power off
STATUS - bi-color Yellow
Green
The CPU is in the bootup process, self test, or downloading code
The CPU has successfully completed the boot, self test, and code download
process, and that the Cisco
uBR10-SRP- OC12SML DPT WAN line card is
the active card
MAINT Off
Yellow
Normally off, no maintenance action is required
Indicates a required maintenance operation and that the Cisco uBR10-SRP-
OC12SML DPT WAN line card can be hot-swapped
RX CARRIER–B Green
Off
The DPT port WAN has detected valid SONET or SDH framing on the
received carrier.
No valid SONET or SDH framing
ACTIVE Green
Off
Side B of the DPT port line is functioning
Not active
RX PKTS (Packets) Blinking Green
Off
The DPT port line has received a packet. This LED flickers in normal
operation, indicating traffic
No traffic
RX CARRIER–A Green
Off
The DPT port line has detected valid SONET or SDH framing on the received
carrier
No valid SONET or SDH framing
ACTIVE Green
Off
Side A of the DPT port line is functioning
Not active
RX PKTS (Packets) Blinking Green
Off
The DPT port line has received a packet. This LED flickers during normal
operation indicating traffic.
No traffic
PASS-THROUGH Amber
Off
The DPT port line is in a pass-through state
Not active
ENABLED Green
Off
The DPT port line is enabled for operation; however, the interface port might
be in the shutdown state
Not active