Universal Broadband Router Hardware Installation Guide

1-43

Cisco uBR10012 Universal Broadband Router Hardware Installation Guide

OL-18259-01

Chapter 1 Cisco uBR10012 Universal Broadband Router Overview

Network Uplink Cards

Note The Cisco uBR10-SRP-OC12SML DPT WAN line card requires two card slots. For that reason, the card

is normally installed in Slot 2 and Slot 4 if you are using two cards. If you are using only one card then

install the card in Slot 2, Slot 3 or Slot 4.

Figure 1-27 shows the faceplate. The part number of the card (UBR10-SRP-OC12SML) is next to the

CLEI code label. The label (2xOC-12/STM-4/SRP SM-LR) above the transmit and receive port

connections defines the optical carrier specifications for this card.

Figure 1-27 Cisco uBR10-SRP-OC12SML DPT Faceplate

Figure 1-28 shows the Cisco uBR10-SRP-OC12SML DPT WAN line card.

Figure 1-28 Cisco uBR10-SRP-OC12SML DPT WAN Line Card

68499

68500

Ejector Lever

CLEI code

Captive

screws (4)