Universal Broadband Router Hardware Installation Guide

1-36
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
OL-18259-01
Chapter 1 Cisco uBR10012 Universal Broadband Router Overview
Network Uplink Cards
Network Uplink Cards
The following sections describe the network uplink cards used in the Cisco uBR10012 universal
broadband router:
• Cisco Single Port Gigabit Ethernet Line Card, page 1-36
• Cisco Half-Height Gigabit Ethernet Line Card, page 1-38
• Cisco OC-12 POS Line Card, page 1-41
• Cisco uBR10-SRP-OC12SML DPT WAN Line Card, page 1-42
• Cisco uBR10012 OC-48 DPT/POS Interface Module, page 1-45
Cisco Single Port Gigabit Ethernet Line Card
The single-port Gigabit Ethernet (GE) line card provides a trunk uplink to devices such as GSRs, as well
as connections to content servers and Web caches. The GE
line card provides the Cisco uBR10012 router
with an IEEE 802.3z compliant Ethernet interface running at 1 Gbps in full duplex mode.
The port uses a Gigabit Interface Converter (GBIC) that supports Gigabit Ethernet rates on a variety of
Gigabit Ethernet interface types (SX, LX/LH, ZX) which can be changed or upgraded at any time (see
Table 1-18). The Cisco uBR10012 router supports multiple GE line cards to support connectivity to
multiple destinations and to provide network layer redundancy.
Warning Class 1 laser product. Statement 1008.
Warning Invisible laser radiation present. Statement 1016.
Warning Because invisible radiation may be emitted from the aperture of the port when no fiber cable is
connected, avoid exposure to radiation and do not stare into open apertures. Statement 1056.
Warning Statement for Sweden
Warning Osynlig laserstrålning när denna del är öppen och förregleringen är urkopplad. Rikta inte blicken in
mot strålen. Statement 36.
US0 through US19 Green
Off
Upstream enabled–path is configured and able to pass traffic
Upstream port is not enabled
DS0 through DS4 Green
Off
RF enabled–downstream path is configured and able to pass traffic out
through the upconverter at RF frequencies
RF is not enabled
Table 1-16 Cisco uBR10-MC5X20S/U Card LEDs and Their Functions (continued)
LED Status Description