Universal Broadband Router Hardware Installation Guide

1-31
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
OL-18259-01
Chapter 1 Cisco uBR10012 Universal Broadband Router Overview
Cable Interface Line Cards
The Cisco uBR10-LCP2-MC16S cable interface line card has one downstream port and six upstream
ports. The upstream ports are labeled US0 through US5. The downstream port is labeled DS. There are
six LEDs labeled MGR ACT (manager active) next to each upstream port. See
Table 1-11 for a
description of the LCP2 adapter card LEDs and Table 1-12 for descriptions of the cable interface line
card LEDs and their functions.
Cisco uBR10-LCP2-MC16x LEDs
The Cisco uBR10-LCP2 adapter card and the cable interface line card each have their own set of status
LEDs on the front of the module. The adapter card LEDs are described in
Table 1-11. The
Cisco uBR10-MC16x cable interface line card LEDs are described in Table 1-12.
Table 1-11 describes the adapter card LEDs and their functions.
Table 1-12 describes the cable interface line card LEDs and their functions.
Ta b l e 1-11 Cisco uBR10-LCP2 Adapter Card LEDs and Their Functions
LED Color Description
POWER Green
Off
Power is being supplied to the LCP2.
Power is off.
STATUS
Status LED on N+1 or
redundant card in chassis
Yellow
Green
Blinking green
The Cisco uBR10-LCP2 adapter card is in the bootup process, is in self test, or
is downloading code
The Cisco uBR10-LCP2 adapter card has successfully completed the boot, self
test, and code download process
The board is in Standby or Protect card mode
MAINT Off
Yellow
Normally off, no maintenance action is required.
It is safe to remove the entire assembly (adapter card plus cable interface line
card) from the chassis
Ta b l e 1-12 Cisco uBR-MC16x Cable Interface Line Card LEDs and Their Functions
LED Status Description
ENABLE Green
Off
The cable interface line card is operating normally, receiving DC power from the
router midplane, and configured for operation
The card is shut down or the slot is not working
Upstream Green
Off
For each upstream port, indicates that the upstream path is enabled and
configured
The port is not properly configured, or is shut down, or the slot is not working
Downstream Green
Off
For each downstream port, indicates that the downstream path is enabled and
configured.
The port is not properly configured, or is shut down, or the slot is not working
MGR ACT
(uBR-MC16S only)
Green
Off
Spectrum management activity on the channel.
Spectrum management is not active.