Universal Broadband Router Hardware Installation Guide
Index
IN-11
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
OL-18259-01
tools and supplies for connecting the chassis
ground 3-23, 3-26
tap manufacturers D-1, D-3
TCC+ card
captive screws (figure) 5-36
description 1-36
external clock reference source 1-26
faceplate (figure) 1-26
installing a blank cover in an empty slot 5-37
LEDs (table) 1-27
technical assistance information 4-2
Telnet connection 4-4
temperature
requirements 2-6
warning messages 2-5
terminal server connections 3-62
terms and acronyms 1-xix
Timing, Communication, and Control Plus card, see TCC+
card
tools and supplies
connecting DC power 3-29, 3-32, 3-49
connecting ground 3-26
for maintenance and replacing modules 5-2
transmission distance, fiber-optic 2-9
troubleshooting 4-4
console port 4-5
cooling subsystems 4-2, 4-11
DC PEM 4-7, 4-8
Ethernet connections 4-4
fan assembly module 5-7
identifying startup problems 4-6
line cards 4-12
overview 4-2
power subsystem 4-8
power supply 4-2
processor 4-2
startup problems 4-6
turning off
AC PEM (figure) 5-22, 5-27
DC PEM (figure) 3-6, 5-9, 5-14
second DC PEM (figure) 5-18
typical 19-Inch equipment rack posts and mounting strips
(figure)
2-11
typical interfaces found on a Cisco uBR10012 router
(table)
3-64
U
upconverter manufacturers D-1, D-3
upgrading to an HHGE line card 5-59
V
vector signal analyzer manufacturers D-2, D-4
W
warnings
AS/NZS 3260 installations 3-1
blank faceplates 5-31, 5-37, 5-42, 5-62
class 1 laser 1-36, 1-38, 1-41, 1-42, 3-55, 5-39
connecting to the power source 2-4, 2-7, 3-28
connecting units to the supply circuit 3-28
disposal 1-12, 1-20
ground connection and disconnection 3-25
more than one power supply connection 5-2
mounting the chassis 3-23
never defeat the ground conductor 3-24
overcurrent 3-28
preventing injury while lifting the chassis 2-3, 3-23
qualified personnel 2-2
remove power from the DC source 3-28, 5-8, 5-14, 5-19
remove the tape from the circuit breaker switch 5-12
restricted access 2-5
secure power cabling 3-28
trained and qualified personnel 1-xii, 1-1, 2-2
translated 1-xiv
two-pole disconnect device 3-28