Universal Broadband Router Hardware Installation Guide

Index
IN-8
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
OL-18259-01
M
manufacturers
European headend provisioning requirements
(table)
D-3
North American headend provisioning requirements
(table)
D-1
media cards
formatting 3-66
memory
devices on the Cisco uBR10012 router 1-7
miswire LED 5-9, 5-15
modules
Cisco uBR10-LCP2-MC28C 1-32, 1-33
Cisco uBR-MC28C 1-32
DC PEM 1-48
fan assembly 1-48
Gigabit Ethernet 1-36
installing a PC media card 5-34
LCD display panel 1-14
OC-12 POS 1-41
PRE 1-15
replacing
air filter 5-5
replacing a PRE module 5-28
replacing both DC PEMs 5-13
replacing the fan assembly module 5-6
slot numbering 1-11
TCC+ card 1-36
tools required for replacing 5-2
mounting brackets, attaching 3-17
mounting brackets for the Cisco uBR10012 router
(figure)
3-17
N
NCTA cable television channels and relative frequencies
(table)
C-2
NEBS Level 3 support 1-7
nonoperating specifications 2-6
no shutdown command 3-65
NTSC
frequency allocation C-2
standards, description C-1
NTSC (M)
frequency allocations C-8, C-10
O
OC-12 POS line card 1-41
faceplate (figure) 1-41
LEDs (table) 1-42
SC connector 1-41
specifications (table) 1-41, A-7
opening the ejector levers (figure) 3-12, 5-30, 5-41
operating specifications 2-6, 2-7
optical cables 1-47
output voltage, Cisco uBR10-LCP2-MC16x 1-30, 1-32
overheating at startup 4-6
P
PAL C-1
frequency allocation C-14
standards, description C-1
password
secret 3-64
Telnet 3-64
PC media card
backing up 5-2
formatting media cards 3-66
installing 5-34
LEDs 4-6
PEM, AC, see AC PEM
PEM, DC, see DC PEM
Performance Routing Engine, see PRE module
physical description 1-7
pinouts