Universal Broadband Router Hardware Installation Guide

Index
IN-6
Cisco uBR10012 Universal Broadband Router Hardware Installation Guide
OL-18259-01
features, Cisco uBR10012 router 1-7
fiber-optic
cables B-8
distance limits 2-9
transmission characteristics (table) 2-9
transmission rates 2-9
field replaceable unit, see FRU
filter, replacing 5-1
frequency allocation
NTSC C-1
NTSC (M) C-8, C-10
NTSC standards C-2
PAL standards C-14
related Web sites C-1
SECAM standards C-14
standards comparisons C-2
front cover
removing 3-4, 5-3
replacing 3-58, 5-4
FRU, removing and replacing 5-1 to 5-68
functional overview 1-3
G
GBIC
1000Base-LX/LH 1-38
1000Base-SX 1-37
1000Base-ZX 1-38
port 1-36
specifications 1-37
GBIC port cabling specifications (table) 1-37
general troubleshooting tips (table) 4-3
Gigabit Ethernet line card
description 1-36
faceplate (figure) 1-38
gigabit Ethernet line card
cable management (figure) 3-58
connecting 3-56
faceplate (figure) 1-37
GBIC port 1-36
LEDs (table) 1-37
specifications A-6
GPS receiver manufacturers D-2, D-3
grounding lug 3-26
H
hardware differences with other Cisco CMTS
platforms
1-48
HFC B-1
HHGE line card
installing 3-46
removing 3-12
slot locations 3-43
troubleshooting 4-13
upgrading 5-59
humidity
requirements 2-6
specifications A-1
I
inserting
cable interface line card (figure) 3-40, 5-63
GBIC (figure) 3-56
network line card (figure) 5-43
PC media card (figure) 5-35
PRE module in the chassis (figure) 5-32
the TCC+ card (figure) 5-38
installing 5-34
AC PEM (figure) 5-24
air filter 5-5
attaching the chassis to equipment racks (figure) 3-25
cable interface line cards 5-60
DC PEM 5-22
DC PEM (figure) 3-35, 5-12, 5-17
fan assembly module 5-6
front cover 3-58, 5-4